DS200DTBBG1ABB GE Terminal Digital Connector Board Mark V Ge Turbine Control

Product Details:

The GE Terminal Digital Connector Board DS200DTBBGIABB features 2 terminal blocks with terminals for 95 signal wires in each. It also

contains 3 50-pin connectors. The IDs for the 40-pin connectors are JFF, JFG, and JFH. It also is populated with bayonet connectors and 5

jumpers.

The board is 3 inches in height and 11.5 inches in length. It has 1 hole in each corner for the installer to attach the board to the board rack in the

interior of the drive. The drive has multiple positions that can accept the installation of the board. However, it is best practice to install the board in

the same position as the old board it is replacing. This is because of the large number of signal wires and ribbon cables attached to it. Cable

routing is very important. If the cables are not routed properly interference can result and also the cooling of the drive interior can be negatively

affected. The drive interior has many power cables and signal wires and ribbon cables. The power cables if routed too near the signal wires can

interfere with the signals. This might result in inaccurate signals being transmitted and received by the board. The solution is to route the power

cables as far as possible from the signal wires.

The other problem that can result from improper cable routing is reduced air flow within the drive. This can occur if bundles of cables block the

flow of air in front of air vents or around components that generate heat.

Sumset International Trading Co.,Ltd Is A Professional Supplier For Industrial Automation Spare Parts.

We specialize in PLC modules, DCS control cards, ESD control cards, turbine supervisory, vibration monitoring and asset protection system.

We Are The World's Leading Industrial Equipment Supplier, Specializing In The Production Of Automation Control System Modules And Spare

Parts For Several Years. We Purchase From Factories Of World Famous Brands, Such As Konnad (General Agent In China), Bently Nevada, ABB,

Invensys Triconex, GE Fanuc, Foxboro, Emerson, Epro, Schneider Modicon, Westinghouse, Siemens, Woodward, Hima, Yaskawa, Bosch

Rexroth, Rosemount, Etc.

Many products in stock and the warranty is 1 year

Rockwell Allen-Bradley:
SLC500: 1747/1746 series
MicroLogix: 1761/1763/1762/1766/1764 series
CompactLogix: 1769/1768 series
Logix5000: 1756/1789/1794/1760/1788 series
PLC-5: 1771/1785 series

ABB:
AC800M series module,Industrial robots spare parts DSQCseries ,Bailey INFI
90,800xA,Advant OCS with
Master Software, with MOD 300software Advant OCS, Freelance - Distributed
Control System for Process Industry, Symphony Melody, Satt OCS, Symphony DCI
System Six, Harmony/INFI 90,Security system

GE:
IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module ,Communication
module ,Analog digital module
EX2100,EX2000 Excitation system card ,IS200 series DS200 series

Bently Nevada:
3500/3300 Surveillance protection syste,Proximitor eddy current sensor probe

EPRO:
PR6422/PR6423/PR6424/PR6426 eddy-current transducer,PR9268series
Electrodynamic absolute vibration sensor MMS6000 system

Emerson:
DeltaV system Dual - channel redundant security system Redundant controller
Power supply module I/O unit Analog AImodules Analog AO modules

Woodward:
SPC valve position controller 505/505E(9907-162, 9907-164, 9907-165, 9907-
167)digital controller, 2301A controller, 9905 series, 2301D-ST series

Yokogawa:
CS3000 system CPU control module, Analog module

Honeywell:
Alcont,Experion LS,Experion PKS,Experion HS,Plant Scape
TDC 2000,TDC3000,TPS,security system

Westinghouse:
OVATION system,WDPF system,WEStation

Invensys Triconex:
Redundant fault-tolerant control system,the most modern fault-tolerant controller
based on triple-module redundancy (TMR) architecture

Invensys Foxboro:
I/A Series system,FBM(input / output modules) sequential control,Ladder logic
control, Accident recall processing,Digital-to-analog conversion,Input / output signal
processing,Data communication and processing